|
FAQ'S How can I be sure of the quantity of ready mixed concrete supplied ? Can I add water to the ready mixed concrete at the site How do I ascertain the quality of ready mixed concrete ? What are the dimensions of transit mixers What is the minimum load size Bamburi Ready Mix Concrete can deliver ? Is there any time limit for unloading of ready mixed concrete at site ? How does a transit mixer work ? How can I be sure of the quantity of ready mixed concrete supplied? Apparent ready mixed concrete shortages are caused by: 1. Miscalculation of form volume or slab thickness when actual dimensions exceed the assumed dimensions by even a fraction. 2. Deflection or distortion of the formwork. 3. Irregular subgrade and its settlement. 4. Smaller quantities wasted or used in incidental works for large pours.
To ensure sufficient supply of ready mixed concrete: 1. Measure formwork accurately and order sufficient quantity to finish the job. 2. For large pours, include an allowance of about 2% over planned dimensions to account for wastage, potential increased thickness, etc. 3. Towards the end of large pours, carefully measure the remaining volume and confirm the closing quantity to the ready mixed concrete supplier. Can I add water to the ready mixed concrete at the site?
NO! Restrain masons at the site. Do not force Transit Mixer Operators to add water to ready mixed concrete. Consequences of such actions can be severe. Properly designed ready mixed concrete contains optimum water. Inform the ready mixed concrete supplier if workability (slump) of ready mixed concrete is not as expected. If required, dosing of admixtures along with a small quantity of water would be done by the ready mixed concrete supplier´s technical personnel. How do I ascertain the quality of ready mixed concrete?
Ready mixed concrete mixes are supplied only after exhaustive laboratory and plant trials. To ensure consistent quality, incoming raw materials are regularly tested. Sampling and testing of ready mixed concrete is done everyday as per Codal stipulations. At our Bamburi Ready Mix Concrete, we invite you to visit our laboratories to witness the process. What are the dimensions of transit mixers?
The transit mixers are about 9 m long, 2.5 m wide and 3.8 m high How much does a truck weigh ? A truck weighs 10 tons when it is empty and 25 tons when it is fully loaded with ready mixed concrete. What is the minimum load size Bamburi Ready Mix Concrete can deliver? Bamburi Ready Mix Concrete can deliver a minimum load size of 4 cubic meter. What is the duration for which the ready mixed concrete remains usable ? Depending on the workability, the ready mixed concrete might be usable for up to 3 hours. Is there any time limit for unloading of ready mixed concrete at site ? International Standards specify that ready mixed concrete must be discharged from the transit mixer truck within 2 hours of the time of loading. It is also mandatory to make arrangements at site to ensure that full load of ready mixed concrete is discharged within 30 minutes of arrival on site.
How does a transit mixer work?
When the ready mixed concrete is transported to the construction site, the ready mixed concrete is pushed deeper into the drum attached to the back of the truck with the help of a spiral blade fitted within the drum. This is achieved by rotating the drum in one direction. This process is known as charging the transit mixer. At the construction site, the drum is rotated in the other direction, which forces the ready mixed concrete out of the drum. This process is known as discharging. The ready mixed concrete may be discharged directly into chutes, pumps or on to conveyor belts.
Pumps are designed to facilitate pumping of ready mixed concrete through the pipeline under high hydraulic pressure. When ready mixed concrete is pushed through the pipeline, it is separated from pipe line wall by a lubricating layer of cement, water and fine aggregates. Ready mixed concrete should have enough cohesiveness and workability for the mix to move easily through pipeline, bends, reducers and hoses. |
Concrete paving blocks
Our paving blocks are available in various shapes and colours that can be laid in different designs. They are manufactured under strict conditions to meet set standards. We are the only ones in our industry to be ISO 9001:2008 certified. All our Heavy-duty blocks meets the Kenya Bureau of Standards KS-02-827 standard.
